Fly Rod Rebuild Series - Replacing old parts with new...

Well folks, for those following this series on the rebuilding of these two old fly rods...

 The parts are here, the parts are here!

Cork grips, bamboo finish, guides, tip tops... etc.  For those asking I have about $140 invested total so far in the two rebuilds... The reel seats have both been cleaned and lightly polished and will be re-used. The next step is to apply 5-6 coats of finish on all the bamboo sections. Stay Tuned.


Comments

  1. The thread Alan is size A nylon, specifically for wrapping line guides....

    ReplyDelete

Post a Comment

Popular posts from this blog

Making dubbing 101 a step-by-step by Doug Korn.

My last post on Blogger

Fly tying - Hendrickson and Blue Quill CDC Emergers