Practice kit making with Willow...

Here's my bow drill kit and some practice, willow spindle and hearth board.

Comments

Post a Comment

Popular posts from this blog

tying my version of Walt's Worm a step-by-step

Image
My version of Walt's Worm is a bit different than most, I think I'll call it the "Korn's Worm".   I have tried to incorporate Frank Sawyer's - Killer Bug and Walt Young's - Walt's Worm, taking the best from both.  I use the tying method of Young and materials from Sawyer. Here in PA and NY this fly is a proven trout taker. It imitates a bunch of flies: crane fly larva, grubs, cased caddis, etc...  Materials Hook: 1xl nymph #12-16 Thread: tan Serafil 200 or 6/0 Uni Weight: 28 ga. copper wire Note: copper wire is used as it was on Sawyer's Killer Bug.  In the sunlight when wet the copper will show through.... so they say - I just know it works and I wouldn't change it! Body: Patons Classic Wool Natural Mix (00229) yarn made into dubbing. Note: the Patons yarn is a very good substitute for Chadwick's 477-wool with was used in Sawyers Killer Bug.  Or you can use Hareline Hares Ear Plus #1 or #7. A very simple fly to ...
Read more

Tying the Found Link (by Kelly Galloup)

Image
I really like this Mayfly pattern. I played around at the vise this morning and tied a few. Here's one I tied as a PMD on a #14 1xl dry fly hook. It doubles as a spinner and an upright winged Mayfly. The upright wing is also used as a sighter for us old guys and when viewed from the bottom it looks like a spinner. Kelly's Video: https://www.youtube.com/watch?v=EV1AYffuVLA Thread: Roman Moser's Power Silk 10/0 (or Danville 6/0) Hook: Daiichi 1110 Tail: Light Pardo Whiting Coq de Leon  Body: Deer Hair Under Wing: Dun or Adams Gray Crinkled Z-Lon  Thorax: Super Fine Dubbing  Wing: Deer Hair
Read more

Making dubbing 101 a step-by-step by Doug Korn.

Image
Making dubbing from yarn is easy using a coffee grinder.  Buy one just for making dubbing, they are cheap, about $15.  Experiment with different yarns yourself to find the right color, texture and float-ability desired for your fly tying needs. Today's goal is to make an orange sulphur dubbing for dry flies. Materials needed.  All you really need is a coffee grinder and some yarn... I use a 12 inch board to measure my "parts".   I cut one part of orange yarn and ten parts yellow.  Then, cut the 11 pieces of yarn in 3/4 inch lengths or "bundles". Keep the 3/4 inch bundles nicely lined up so that they can be added to the coffee grinder in the proper 1 to 10 ratio.  You will end up with about 15-16 bundles. Add 3-4 bundles at one time to the grinder.  Turn it on and run it for about 20 seconds.  Grinding times will vary depending on your wool and the volume of yarn in the ...
Read more