Ouch.... dummy....

Unfortunately I injured my ring finger on my right hand by cutting the tip of it off.. No, not in the workshop but in the kitchen cutting up chicken, of all things. I work with sharp tools all day and hurt myself in a moment of distraction using a butcher knife… 

It was a difficult day at Urgent Care and the treatment was worse than the injury, with nerve blocking shots and cauterizing, etc...
 
I will need to take a couple of weeks off, as I cannot work in the shop for a while. I just hope this heals up faster than they predict…. I need to be able to work with my hands, Doug.


finally stopped the bleeding by cauterizing the wound..



Comments

  1. MarkWMarch 25, 2018 at 3:10 PM

    Oh no ! Hope everything heals up just fine

    ReplyDelete
  2. Doug KornMarch 25, 2018 at 8:29 PM

    Me too, Mark... me too....

    ReplyDelete
  3. Normand FrechetteApril 14, 2018 at 2:15 PM

    I sliced off a finger tip on one of those mandolin style food slicer. A trip to the emergency room was required to stop the bleeding. They wrapped the sliced off area with some kind of medical sponge. It took quite a while to heal.

    ReplyDelete

Post a Comment

Popular posts from this blog

Making dubbing 101 a step-by-step by Doug Korn.

Image
Making dubbing from yarn is easy using a coffee grinder.  Buy one just for making dubbing, they are cheap, about $15.  Experiment with different yarns yourself to find the right color, texture and float-ability desired for your fly tying needs. Today's goal is to make an orange sulphur dubbing for dry flies. Materials needed.  All you really need is a coffee grinder and some yarn... I use a 12 inch board to measure my "parts".   I cut one part of orange yarn and ten parts yellow.  Then, cut the 11 pieces of yarn in 3/4 inch lengths or "bundles". Keep the 3/4 inch bundles nicely lined up so that they can be added to the coffee grinder in the proper 1 to 10 ratio.  You will end up with about 15-16 bundles. Add 3-4 bundles at one time to the grinder.  Turn it on and run it for about 20 seconds.  Grinding times will vary depending on your wool and the volume of yarn in the grinder. 
Read more

My last post on Blogger

Image
Yep - this is my last post on blogger..... There's just not enough participation on my blog to keep it going. I post the same material on Facebook so you can follow me there if you like, that's where all my future posts will be. Just look up Doug Korn on Facebook. I will also be discontinuing my blog reader, as most of the folks I follow are on Facebook and I will read and respond there. I will leave my "On the Fly" blog up for now but I will not add any more content. My thanks for all of you that have followed my blog and commented. I will have many more projects and posts to come over on Facebook, see ya there.
Read more

Fly tying - Hendrickson and Blue Quill CDC Emergers

Image
Tying a few flies for next time on the Delaware.  Easy CDC emergers tied on some nice vintage Mustad Viking 9548A hooks. Ephemerella  subvaria –  Hendricksons – #12 to #14  tied and photographed by Doug Korn Hendrickson Emerger,  size #12 Thread: MFC light olive 6/0 Body Color - pink/olive dubbing Wing Color - CDC medium Dun, length of hook Legs - CDC butts Shuck - needloft yarn amber  Paraleptophlebia  adoptiva  (Blue Quill) – #16 to #18 Paralep is the scientific " nickname " for the genus Paraleptophlebia.  ...  The most popular common names for Paraleps are " blue quill " and "mahogany dun."  ...  tied and photographed by Doug Korn Blue Quill Emerger, size #16 Thread - Danville dark brown 6/0 Body Color - thread over shuck material,  dark brown, sparse thread wraps. Wing Color - CDC medium-dark Dun, length of hook Legs - CDC butts  Shuck - needloft yarn gray
Read more