tying the Neversink a step-by-step

This fly is a great all-round Caddis Fly imitation as-well-as; Stone Fly, Golden Stone and Yellow Sally.  Just change the colors of the thread, foam and hackle.  



Materials List:
Hook: 1xl nymph #12-18 this is a 14.
Thread: Danville 6/0
Body: black craft foam 2 mm
Wing: deer hair
Hackle: Rooster Badger

dress hook to bend with touching turns then back to half shank

add small drop of super glue 

tie in foam with thread wraps going forward, trim waste

tie in a small clump of deer hair winding thread through the buts to the hook eye

trim butts close

tie in a badger hackle shinny side towards you

wrap hackle forward 3-4 turns, tie off

double whip finish, trim waste piece

completed Neversink
tied and photographed by Doug Korn

Comments

  1. PieterApril 17, 2012 at 9:46 AM

    Looks exactly like a Puterbaugh Caddis? I fish it quite often for Yellowfish and trout, can also try olive and yellow foam!

    ReplyDelete
  2. Doug KornApril 17, 2012 at 11:55 AM

    Yes, 4 sure it's a Neversink in the South of the USA and a Puterbaugh most everywhere else.... at least that's been my experience...

    ReplyDelete

Post a Comment

Popular posts from this blog

Making dubbing 101 a step-by-step by Doug Korn.

Image
Making dubbing from yarn is easy using a coffee grinder.  Buy one just for making dubbing, they are cheap, about $15.  Experiment with different yarns yourself to find the right color, texture and float-ability desired for your fly tying needs. Today's goal is to make an orange sulphur dubbing for dry flies. Materials needed.  All you really need is a coffee grinder and some yarn... I use a 12 inch board to measure my "parts".   I cut one part of orange yarn and ten parts yellow.  Then, cut the 11 pieces of yarn in 3/4 inch lengths or "bundles". Keep the 3/4 inch bundles nicely lined up so that they can be added to the coffee grinder in the proper 1 to 10 ratio.  You will end up with about 15-16 bundles. Add 3-4 bundles at one time to the grinder.  Turn it on and run it for about 20 seconds.  Grinding times will vary depending on your wool and the volume of yarn in the ...
Read more

Tying the Found Link (by Kelly Galloup)

Image
I really like this Mayfly pattern. I played around at the vise this morning and tied a few. Here's one I tied as a PMD on a #14 1xl dry fly hook. It doubles as a spinner and an upright winged Mayfly. The upright wing is also used as a sighter for us old guys and when viewed from the bottom it looks like a spinner. Kelly's Video: https://www.youtube.com/watch?v=EV1AYffuVLA Thread: Roman Moser's Power Silk 10/0 (or Danville 6/0) Hook: Daiichi 1110 Tail: Light Pardo Whiting Coq de Leon  Body: Deer Hair Under Wing: Dun or Adams Gray Crinkled Z-Lon  Thorax: Super Fine Dubbing  Wing: Deer Hair
Read more

Fly tying - Hendrickson and Blue Quill CDC Emergers

Image
Tying a few flies for next time on the Delaware.  Easy CDC emergers tied on some nice vintage Mustad Viking 9548A hooks. Ephemerella  subvaria –  Hendricksons – #12 to #14  tied and photographed by Doug Korn Hendrickson Emerger,  size #12 Thread: MFC light olive 6/0 Body Color - pink/olive dubbing Wing Color - CDC medium Dun, length of hook Legs - CDC butts Shuck - needloft yarn amber  Paraleptophlebia  adoptiva  (Blue Quill) – #16 to #18 Paralep is the scientific " nickname " for the genus Paraleptophlebia.  ...  The most popular common names for Paraleps are " blue quill " and "mahogany dun."  ...  tied and photographed by Doug Korn Blue Quill Emerger, size #16 Thread - Danville dark brown 6/0 Body Color - thread over shuck material,  dark brown, sparse thread wraps. Wing Color - CDC medium-dark Dun, length of hook Legs - CDC butts  Shuck - needloft yarn gray ...
Read more